WHAT WE DO

• Plumbing

  Plumbing services

  • Faucet repairs and replacements (kitchen, bathroom, laundry)

  • Toilet diagnostics, repairs, and full replacements

  • Leak detection and repair (including slab and hidden leaks)

  • Burst pipe emergency repairs and winterization

  • Water line installation and replacement

  • Hot water tank repair, replacement, and installation (tank and tankless)

  • Water heater flushing and maintenance

  • Sump pump installation, repair, and maintenance

  • Pressure regulator installation and adjustment

  • Water softener and filtration system installation and service

  • Bathroom and kitchen fixture upgrades and installs

  • Plumbing for renovations and new builds (rough-in and finish plumbing)

  • Preventative maintenance plans and annual plumbing inspections

  • Frozen pipe thawing and prevention services

  Why choose Buffalo Mechanical Services Ltd.?

  • Experienced licensed plumbers serving Brandon, Manitoba

  • Prompt, friendly service with transparent pricing

  • Quality parts and workmanship backed by guarantees

  • Clean, respectful technicians who treat your home like theirs

  Contact us today for a free estimate or to schedule plumbing service.

• Renovations

  If you’re planning to add a bathroom and kitchen to your home, Buffalo Mechanical Services Ltd. can handle the full project—from initial planning and permits through to final fixtures and testing. We provide professional residential plumbing, heating, and cooling services in Brandon, Manitoba, tailored to new additions and conversions.

  What we offer

  • Site assessment and consultation: We evaluate your existing plumbing, drainage, HVAC capacity, and structural considerations, and provide clear recommendations and cost estimates.

  • Permit support and compliance: We prepare or assist with required plumbing and mechanical permit applications and ensure work meets Manitoba building codes and local regulations.

  • Rough‑in plumbing: Layout and installation of supply lines, drain-waste-vent (DWV) systems, gas lines if needed, and connections for fixtures and appliances.

  • Fixtures and appliance hookups: Installation and connection of sinks (kitchen and bathroom), faucets, toilets, bathtubs, showers, dishwashers, laundry hookups, and garbage disposals.

  • Water heating solutions: Install or upgrade water heaters (tank, tankless, or hybrid) sized to meet increased demand for an additional kitchen and bathroom.

  • HVAC adjustments: Assess and modify heating and cooling systems, extend ductwork or add dedicated heating options (baseboard, in-floor radiant, or mini‑split systems) to maintain comfort and efficiency.

  • Drainage and ventilation: Proper venting for DWV lines, installation of bathroom exhaust fans and kitchen range hood venting to exterior.

  • Testing and commissioning: Leak testing, pressure checks, and confirmation that all systems operate correctly and efficiently before handover.

  • Warranty and support: Workmanship warranty and ongoing service options for maintenance or future upgrades.

  Typical project steps

  1. Consultation and quote: Onsite visit to discuss layout, fixtures, budget, and timelines.

  2. Design and permits: Finalize plumbing/HVAC plans and obtain necessary permits.

  3. Rough‑in stage: Install pipework, vents, and mechanical components behind walls and under floors.

  4. Inspections: Coordinate municipal inspections during rough‑in and final stages.

  5. Finishes and hookups: Install fixtures, appliances, trim, and complete all connections.

  6. Final testing and handover: Ensure system performance and provide maintenance recommendations.

  Cost considerations

  • Complexity of adding new services where none exist (longer runs, slope changes, or new drain connections) increases cost.

  • Structural work or major HVAC upgrades add to the budget.

  • Fixture quality, appliance selection, and finishes significantly affect the total price. For an accurate estimate, schedule an on‑site assessment.

  Why choose Buffalo Mechanical Services Ltd.?

  • Experienced residential plumbers and HVAC technicians serving Brandon, MB.

  • Code‑compliant installations and permit handling.

  • Attention to detail from rough‑in through commissioning.

  • Clear communication and reliable scheduling.

  To get started, contact Buffalo Mechanical Services Ltd. for an on‑site consultation and no‑obligation quote. We’ll help plan a cost‑effective, code‑compliant addition of a bathroom and kitchen that suits your home and lifestyle.

• Water Heaters

  Water Heater Installation — Buffalo Mechanical Services Ltd.

  Overview Buffalo Mechanical Services Ltd. provides professional water heater installation for homes in Brandon, Manitoba and surrounding areas. We install conventional tanked water heaters and tankless (on-demand) units, working with gas, electric, and hybrid models to match your household needs and budget.

  What we install

  • Conventional tank water heaters (natural gas, propane, electric)

  • Tankless (on-demand) water heaters (gas and electric)

  • Hybrid (heat pump) water heaters

  • High-efficiency and low-NOx models

  • Expansion tanks, pressure-reducing valves, and tempering valves as required

  Installation services included

  • Onsite assessment and sizing to determine the correct capacity and fuel type for your home based on family size, fixture count, and hot water usage patterns

  • Removal and proper disposal of existing water heater

  • Gas line, electrical, and venting installation or upgrades to meet code and manufacturer requirements

  • Water connections, drain pan and drain piping, and pressure relief valve installation

  • Startup, commissioning, and safety checks (combustion analysis on gas units when applicable)

  • Demonstration of controls and maintenance tips

  • Documentation of work completed and manufacturer warranty registration assistance

  Why proper sizing matters An undersized unit can run out of hot water quickly; an oversized unit wastes energy and costs more. We calculate first-hour rating (for tanks) or flow-rate requirements (for tankless) to ensure the system meets your household demand efficiently.

  Energy efficiency and operating cost We’ll explain the relative efficiency, expected annual operating costs, and available rebates or incentives for high-efficiency models. Tankless and hybrid units typically offer lower energy use over time but have higher upfront costs; conventional tanks are less expensive to purchase and install but may cost more to operate.

  Permits, codes, and safety All installations are performed to Manitoba and Canadian codes. We obtain required permits and ensure proper venting, combustion air, electrical connections, and gas fittings. Safety devices such as temperature and pressure relief valves and expansion tanks are installed as required.

  Typical timeline and pricing factors

  • Typical installation time: 3–6 hours for a like-for-like replacement; longer for changes in fuel type, relocation, or additional piping/venting work.

  • Price depends on unit type and model, capacity, fuel type, labour, permitting, and any required system upgrades (gas line sizing, electrical panel work, venting, condensate drainage).

  • We provide written estimates before starting work and outline any options to match performance and budget.

  Maintenance and warranty

  • We recommend annual inspections and regular maintenance (flushing tanks, checking anode rods, inspecting pressure relief valves) to extend service life.

  • New water heaters come with manufacturer warranties; Buffalo Mechanical will also provide workmanship warranties for installations.

  How to get started Contact Buffalo Mechanical Services Ltd. for an on-site assessment and written estimate tailored to your home. Our technicians will recommend the best water heating solution and walk you through costs, timeline, and energy implications.

• Boilers

  Buffalo Mechanical Services Ltd. provides professional boiler services for residential and light-commercial properties in Brandon, Manitoba. We work with a wide range of boilers — including systems rated over 400,000 BTU — to ensure safe, efficient heating for larger homes, multi-unit buildings, and small commercial spaces.

  Services we offer

  • Boiler selection and supply: help choosing the right make, model, and capacity (including high-output systems >400,000 BTU) to match your heat load and distribution system.

  • Boiler installation: full installation by licensed technicians, including piping, flue work, ventilation, controls, and integration with existing hydronic systems.

  • System design and sizing: heat-loss calculations, piping schematics, pump and expansion tank selection, and recommendations for zoning and controls.

  • Balancing and commissioning: ensure proper flow rates, pressure, and combustion tuning for peak efficiency and reliability.

  • Boiler conversions and upgrades: switch fuel types or replace outdated units with modern high-efficiency boilers, condensing or non-condensing as appropriate.

  • Repairs and emergency service: diagnosis and repair of burners, controls, pumps, valves, heat exchangers, and ignition systems.

  • Preventive maintenance and service plans: seasonal inspections, cleaning, safety checks, combustion analysis, and tune-ups to extend equipment life and maintain warranty conditions.

  • Boiler room safety and code compliance: ensure installations meet local codes, ventilation requirements, clearances, and fuel storage/regulation standards.

  • Controls and integration: installation or upgrade of thermostats, outdoor reset controls, building management system (BMS) interfaces, and remote monitoring where applicable.

  • Ancillary equipment: supply and install boilerside pumps, plate heat exchangers, buffer tanks, deaerators, water treatment, and expansion tanks sized for high-output systems.

  Why choose Buffalo Mechanical Services Ltd.

  • Experience with high-output systems: trained to install and service boilers over 400,000 BTU safely and efficiently.

  • Licensed and insured technicians: compliance with Manitoba codes and safety standards.

  • Local knowledge: expertise with Brandon climate and typical building practices for optimal system performance.

  • Transparent estimates and professional workmanship: clear scope, timelines, and post-installation support.

  If you need help sizing or installing a high-output boiler, want a quote, or require service on an existing system, contact Buffalo Mechanical Services Ltd. for reliable, friendly service.

• Furnaces

  Furnace Services — Buffalo Mechanical Services Ltd.

  At Buffalo Mechanical Services Ltd., we provide comprehensive furnace services to keep your home warm, safe, and energy-efficient throughout Manitoba’s cold months. Our friendly, licensed technicians handle everything from routine maintenance to full furnace replacements.

  Services we offer

  • Furnace inspections: Thorough safety and performance checks to identify issues before they become costly repairs. We test ignition systems, heat exchangers, burners, thermostats, and safety controls.

  • Annual tune-ups: Clean, adjust, and optimise your furnace for peak efficiency and reliable operation. Includes filter check/replacement, combustion analysis, and airflow adjustments.

  • Repairs: Fast diagnosis and professional repair of common furnace problems — pilot/ignition failures, noisy operation, short cycling, insufficient heat, and faulty controls.

  • Replacements and installations: Help selecting the right furnace for your home’s size and needs, professional removal of old equipment, and expert installation of high-efficiency models.

  • Emergency service: Available for urgent heating failures to restore warmth and safety quickly during extreme cold.

  • Safety services: Carbon monoxide testing, venting inspections, and heat exchanger checks to ensure your system is operating safely.

  • Efficiency upgrades: Recommendations and installations of high-efficiency furnaces, programmable and smart thermostats, and sealing or airflow improvements to reduce energy bills.

  Why choose Buffalo Mechanical?

  • Licensed, insured technicians with experience serving Brandon and surrounding areas.

  • Transparent pricing and honest recommendations tailored to your home.

  • Focus on safety and energy efficiency to help lower operating costs.

  • Friendly, reliable service with prompt response times.

  Seasonal tips

  • Replace or clean furnace filters every 1–3 months depending on usage and filter type.

  • Keep vents and registers clear of furniture and obstructions for proper airflow.

  • Test your thermostat and consider upgrading to a programmable model to save on fuel costs.

  • Schedule an annual furnace tune-up before the heating season begins.

  Contact us today to book an inspection, tune-up, or installation. Our team will ensure your furnace is ready to perform safely and efficiently all winter.

• Air Conditioners

  Air Conditioner Services — Buffalo Mechanical Services Ltd.

  • Installation: Professional sizing and installation of central air conditioners and ductless mini-split systems to ensure efficient cooling and balanced home comfort.

  • Maintenance: Seasonal tune-ups, filter replacement, coil cleaning, fan and motor inspection, thermostat calibration, and airflow testing to maintain efficiency and extend system life.

  • Repairs: Diagnosis common issues such as refrigerant leaks, compressor problems, faulty capacitors or contactors, frozen evaporator coils, thermostat failures, and unusual noises or vibrations.

  • Replacements & Upgrades: Recommendations for energy-efficient replacements, system upgrades for improved SEER ratings, zoning solutions, and smart thermostat integration to lower operating costs and increase comfort.

  • Ductwork Services: Inspection, sealing, and repair of ductwork to eliminate leaks, improve airflow, and reduce energy loss. Duct cleaning and balancing for better distribution of cooled air.

  • Indoor Air Quality: Installation and servicing of air purifiers, UV germicidal lights, humidity control solutions (dehumidifiers and humidifiers), and high-efficiency filters to improve overall air quality and comfort.

  • Energy Efficiency Assessments: Home audits to identify opportunities for lowering cooling costs through insulation improvements, shading, system tune-ups, and programmable/smart controls.

  • Warranties & Parts: Use of manufacturer-approved parts and offering labour warranties on installations and repairs for reliable performance and peace of mind.

  Servicing Brandon, Manitoba and surrounding areas. Contact Buffalo Mechanical Services Ltd. for dependable air conditioning installation, maintenance, and repair by friendly, experienced technicians.

• Gas Appliances

  Buffalo Mechanical Services Ltd. offers expert residential plumbing, heating, cooling, and gas appliance services in Brandon, Manitoba. Our friendly, licensed technicians handle installation, repair, maintenance, and safety inspections for a wide range of gas appliances, including furnaces, water heaters, gas stoves and ranges, dryers, fireplaces, and BBQs.

  Services we provide

  • Gas appliance installation: Proper sizing, venting, combustion air, and code-compliant hookups. New appliance setup with manufacturer-recommended procedures and safety checks.

  • Repairs and troubleshooting: Fast diagnosis and reliable repair of ignition problems, pilot/ignitor issues, gas leaks, thermostat and control faults, burner problems, and inefficient operation.

  • Preventive maintenance: Annual tune-ups, cleaning and filter changes to extend appliance life and maintain safe, efficient operation.

  • Safety inspections and gas leak detection: Comprehensive safety checks, pressure testing, carbon monoxide testing, and use of approved detectors to identify and remediate risks.

  • Conversions and upgrades: Natural gas to propane (and vice versa) conversions where applicable, high-efficiency upgrade advice, and appliance replacement recommendations.

  • Code compliance and permits: Work performed to Manitoba plumbing and gas codes, including permit acquisition and inspection coordination when required.

  Why choose Buffalo Mechanical Services Ltd.?

  • Licensed and insured technicians experienced with residential gas systems.

  • Commitment to safety: we follow industry best practices and Manitoba regulations for gas work.

  • Transparent pricing and clear explanations of needed repairs or replacements.

  • Friendly, local service in Brandon with prompt scheduling and dependable follow-through.

  Safety tips for homeowners

  • Never ignore a rotten-egg smell (natural gas or added odourant): evacuate and call emergency services and our emergency line.

  • Install and test carbon monoxide alarms on every level of the home.

  • Keep vents and combustion air openings clear of snow, debris, and obstructions.

  • Schedule annual professional maintenance for furnaces, water heaters, and other gas appliances.

  Contact us to schedule installation, service, or an inspection for your gas appliances in Brandon, Manitoba.

• New Construction

  New Construction — Plumbing & HVAC

  Buffalo Mechanical Services Ltd. provides full-service new construction plumbing and HVAC installations for homes and light commercial buildings in Brandon and surrounding areas. We handle every phase of a build, from design-stage planning to final commissioning, ensuring systems that are efficient, code-compliant, and tailored to occupant comfort.

  Plumbing Services for New Construction

  • Rough-in plumbing: layout and installation of waste, vent, and water supply piping per plans and local code.

  • Water service and meter connections: coordinate with municipal utilities for on-site water service installation.

  • Fixture selection and installation: sinks, toilets, tubs/showers, faucets, laundry and utility hookups; we install or work with your supplier’s selections.

  • Hot water systems: install conventional tank, tankless (on-demand), or hybrid water heaters sized to building needs.

  • Gas piping: safe installation and pressure testing for natural gas or propane appliances.

  • Drainage and storm systems: foundation drains, sump pumps, and stormwater management solutions.

  • Backflow prevention: install and test backflow devices where required.

  • Inspections and code compliance: prepare for and complete municipal inspections; ensure systems meet Manitoba and national plumbing codes.

  • Coordination with trades: work with general contractors, framers, electricians, and HVAC to keep schedules aligned.

  • Quality assurance and commissioning: pressure testing, leak checks, and operational verification before turnover.

  HVAC Services for New Construction

  • System design and load calculations: Manual J and Manual D sizing to recommend appropriate heating and cooling systems for comfort and efficiency.

  • Forced-air systems: installation of furnaces, air handlers, ductwork design and installation, supply and return layout, and balancing.

  • Heat pumps and mini-splits: install high-efficiency air-source heat pumps, ductless mini-split systems, or multi-zone solutions suitable for Manitoba’s climate.

  • Hydronic heating systems: design and install boilers, in-floor radiant heating, baseboards, and circulator systems.

  • Ventilation and indoor air quality: HRVs/ERVs, mechanical ventilation, filtration upgrades, and humidification/dehumidification to improve indoor comfort.

  • Refrigeration & commercial HVAC: light commercial systems for small businesses and multi-family projects.

  • Controls and thermostats: install programmable and smart thermostats, zoning controls, and integration for energy management.

  • Gas line work for HVAC: safe installation and testing for gas furnaces and water heaters.

  • Start-up, testing & balancing: commissioning of systems, refrigerant charging, airflow balancing, and performance verification.

  • Warranty and service handover: system demonstrations, maintenance schedules, and documentation for owners and builders.

  Why Choose Buffalo Mechanical Services

  • Experienced in Manitoba new builds: familiarity with local codes, climate challenges, and municipal processes in Brandon.

  • Single-source coordination: plumbing and HVAC teams work together to avoid conflicts and streamline timelines.

  • Energy-efficient options: we recommend equipment and designs focused on long-term operating savings.

  • Reliable timelines and clear communication: we keep builders and homeowners updated at each stage.

  • Post-construction support: maintenance plans, warranty service, and prompt responsive service after turnover.

  Typical New Construction Project Workflow

  1. Pre-construction consultation and site review.

  2. Design, load calculations, and system selections.

  3. Rough-in plumbing and HVAC framing coordination.

  4. Equipment installation, ductwork, piping, and insulation.

  5. System start-up, pressure testing, and commissioning.

  6. Municipal inspections and final approvals.

  7. Owner handover with operation instructions and maintenance recommendations.

  Get a Quote or Project Assessment Contact Buffalo Mechanical Services Ltd. for estimates, design assistance, and construction scheduling for your new home or light commercial project in Brandon and surrounding areas. We’ll help specify the right plumbing and HVAC systems to meet your performance, comfort, and budget goals.